Project cases

Solar Storage System Case

Explore Grandtech inverter and energy storage configurations for residential, commercial and off-grid applications.
Residential to commercialSolutions matched to different load profiles
Flexible configurationsSingle-unit and parallel system options
Global project supportSelection, compatibility and delivery guidance
System configurations

Scalable solar and storage combinations

Every project should be sized according to local voltage, load profile, solar input and required backup duration.

01
High-capacity backup systemSystem configuration

18 kW inverter and 42kWh battery configuration

This Grandtech installation pairs an 18kW inverter with three 14kWh lithium batteries, delivering a total storage capacity of 42kWh. The system stores solar energy for use after sunset and provides backup power during grid outages.

System configuration
18kw inverters + 3 ×14 kWh batteries
Application
Whole-home backup and solar self-consumption
18 kW inverter capacity42 kWh storageExpandable
View story page

High-capacity backup system · System configuration

18 kW inverter and 42kWh battery configuration

View story page
02
Higher-load energy storageSystem configuration

18 kW inverter and 96 kWh storage configuration

This Grandtech installation combines one 18 kW inverter with six 16 kWh batteries, delivering 96 kWh of total energy storage. Designed for backup power and solar self-consumption, the system stores excess solar energy for use after...

System configuration
18 kW inverter + 6× 16 kWh batteries
Application
Residential backup and solar energy storage
18 kW inverter capacity96 kWh storageExpandable
View story page

Higher-load energy storage · System configuration

18 kW inverter and 96 kWh storage configuration

View story page
Our project process

From energy requirements to a matched system

Our team helps organize the information needed to select compatible products and prepare a practical system proposal.

  1. 01

    Requirements

    Confirm location, voltage, load and backup targets.

  2. 02

    System matching

    Select inverter, battery capacity and PV range.

  3. 03

    Compatibility check

    Review communication, protection and expansion plans.

  4. 04

    Delivery support

    Coordinate inventory, shipment and technical guidance.

Planning your solar project

Project Planning & Installation FAQs

Get help with system matching, design, delivery and installation planning. Have a project-specific question? Contact Grandtech.

Not sure how to match an inverter, batteries and solar panels?

Grandtech can help with load calculations, battery sizing and system design based on your project requirements. Share your location, supply voltage, appliances, electricity use and desired backup duration so we can recommend a suitable combination.

Tell us about your project to get started.

Do you only serve customers in the mainland United States?

No. We also serve customers in Puerto Rico, Hawaii and Honduras, and can review requests for other island and international destinations.

Freight to these destinations is quoted separately. Send your delivery address or destination port, postal code and product quantities so Grandtech can confirm the shipping options and freight cost for your order.

What information should I send for a system calculation and design?

Please provide your installation country or region, postal code, supply voltage and phase, main appliances and their power ratings, typical daily electricity use, and required backup duration.

If you already have solar panels, batteries, an inverter or a generator, send the model numbers and specifications as well. Photos of the proposed installation area can also help us understand your project.

Can I use the same configuration shown in a project case?

Our cases are useful starting points, but the final configuration should match your own loads, local power supply, solar input and backup requirements. Share the case you like with Grandtech and we can help adapt the inverter and battery combination to your project.

Can I connect new equipment to my existing solar or battery system?

Compatibility depends on the exact models. Send the specifications of your existing inverter, batteries and solar panels before ordering. We can help review voltage ranges, power limits, battery communication and supported connection options.

A shared connector or nominal voltage alone does not confirm that two products are compatible.

Who should install the system?

Arrange installation and commissioning with a qualified local solar installer or electrician. The installation should follow the selected equipment's latest manuals and applicable local requirements.

Grandtech can assist with product selection, model-specific documentation and technical questions to support your installer.

Can the system run air conditioners, water pumps or other large appliances?

This depends on the inverter's continuous and surge capability, the appliances' starting demand, the loads running at the same time, and the battery's output capability. Send us the appliance nameplate information and your usage plan so we can help assess a suitable system.

How long will the batteries power my home during an outage?

Backup duration depends on usable battery capacity, average power consumption, battery reserve settings and system losses. The number of batteries shown in a case is not a guaranteed runtime for every home.

Share the appliances you want to keep running and the required backup hours, and Grandtech can help estimate the storage capacity you need.

Can I add more batteries or inverters later?

Expansion options depend on the selected models and their supported parallel configurations. Tell Grandtech about your future capacity target before ordering so it can be considered in the initial system design.

Before adding equipment, confirm model compatibility, communication settings and the permitted configuration for the existing system.

What documents and support can I request before installation?

Contact Grandtech for the latest product manuals, datasheets and available model-specific certification documents. Tell us what your installer or project requires so we can confirm the documentation available for the selected equipment.

If questions arise during commissioning, send the model numbers, system configuration, relevant photos and any error messages through our contact page.